Auto greasing kit with SA hydraulic

"

Dimensions and technical characteristics - Single-acting circuit version
> The pump is activated by the hydraulics of the machine: A dose of grease is sent each time the hydraulic function lever is activated (a dose of grease per rise in pressure).
Hydraulic pressure : 30 to 250 bar.
Priming pressure of the pump: 30 bar (Possibility for a lesser priming pressure on request).
Maximum operating pressure of the lubricant: 350 bar.
Service temperature: -10 to 50°C.
Pumping element flow rate: 0.04 to 0.18 cm3/min.
Adjusting of flow rate by screw with locknut.

The kit comprises:
• 1 hydraulic source pump (connection via by-pass)
• 2 grease cartridges 400 grammes
• 1 pump support
• 1 progressive distributor 2 to 6 outlets
• 1 set of connectors and hydraulic hose (hose in 10L and connectors for tapping in 15L)
• 1 set of connectors and greasing hoses
• 1 set of screws
• 1 PVC plug of cartridge
• 1 detailed instructions

P: Pressure - M: To greasing - 1: Greasing flow rate adjustment - 2: Purge

Here are the advantages that you will have by integrating an automatic greasing system:

- Reduction in maintenance costs: when there is a lack of grease, the parts tend to bind and need to be changed (Shafts ...).
- Saves time: greasing takes place automatically during the oper