Auxiliary lines

For powering hammer-hammer lines (single-acting) or high-speed double-acting lines (clamp opening/closing, shears, crusher)

The kit includes

• Control system (electric or hydraulic)
• Distribution adapted to the machine circuit
• Complete line (rigid tube, hoses, fittings, clamps)
• Valves and/or couplers
• Return filter
• Assembly instructions

For feeding hammer-hammer lines (single-acting) and high-speed double-acting lines (pliers): use the same line for hammer and pliers.

Technical specifications

• Control by electric pedal, hydraulic pedal, proportional knob
• Single/double acting conversion with mechanical or electrical control
• Possibility of setting several pressure flow thresholds
• Electrically or mechanically operated

For low flow dual effect feeding: clamp rotation, shear, bucket tilt, rotator feeding.

Technical specifications

• Installation with independent or integrated pump on the main circuit of the machine
• Control by hydraulic pedal, switch or joystick with proportional knob

For feeding pendulum tools without additional line.

Technical specifications

• Quarter-turn valve on the rocker arm or flanged to the cylinder, depending on the machine

For feeding a tool (crusher, cutter, milling machine, generator) with a fixed flow rate that has priority over the other functions of the machine (no flow rate variation).

1. No matter how the machine moves, the tool will always have a priority and regulated flow
2. The tool always runs at the same speed.
3. Maintains the homogeneity of the machine's other movements (straight translation, boom / bucket / dipper synchronisation, etc.).

The kit includes:

• Steering kit adapted to the tool.
• Single or double low pressure flow divider depending on machine.
• Hoses and connectors.
• Full line if necessary.

For feeding a high-dump bucket, a snow plough or a snow thrower...

Technical specifications

• With original section or addition of a distributor
• Control on original or separate joystick